Uponor Smatrix Base PRO control set X-147 + I-147 Bus
Specification:
-autobalancing optimizing energy use and comfort
-up to 6 room thermostats and 8 actuators (24V) per controller; 6 channel expansion module option (with M-140)
-pump and boiler relays
-valve and pump exercise
Smatrix Base Pro controller X-147 with optional touch screen I-147 and KNX option
-up to 16 controller in one system
-daisy chain wiring or star wiring (with M-141)
-optional: display of controller information and settings (with I-147)
-optional: BMS integration via KNX interface (with R-147 and I-147)
Comfort settings comprises (with I-147)
-temperature setback programs for each channel
-max/min temperature limitations and relative humidity control
-holiday settings and automatic summer/winter change
-room bypass function
-advance cooling settings and automatic summer/winter change
-trend visualization (set point vs. room temperature, etc.)
-accessories configuration
-room check function and system diagnostic
Smatrix Base Pro controller X-148 ModBus RTU
Read data points
-temperature: outdoor / room / floor
-humidity level
-status of: actuator / pump / boiler / general purpose input (GPI)
-connection status of thermostat
-dynamic heat curve offset in integrated heat pump
Read and write data points
-room setpoint
-min/max levels for: setpoint / floor temperature
-settings: comfort/eco and autobalancing on/off
-heating/cooling: state / offset
-cooling not allowed for a room
-integrated heat pump defrost state
Application:
- wired room temperature control for radiant heating and cooling
- set point range: +5°C ... +35°C
Certification:
- CE, EAC
- supports up to 6 room thermostats and 8 actuators
- option to extend up to 12 room thermostats and 14 actuators with 1071686
- max. power input per actuator: 24VAC / 0.2A (0.4A peak)
- protection class: Class II IP20
- color: grey RAL7015
Consisting of:
- Uponor Smatrix Base PRO interface I-147 Bus
- Uponor Smatrix Base PRO controller X-147 Bus 6X
- quick guide, security instructions
- 2x micro SD card for touch panel and controller (pre-inserted)
- DIN rail (length: 37cm)
- mounting material
- protection class: Class II IP20
- color: grey RAL7015
